Mailman bundler - GNU Mailman, Postorius and HyperKitty¶
Mailman is written in Python which is available for all platforms that Mailman is supported on, including GNU/Linux and most other Unix-like operating systems (e.g. Solaris, *BSD, MacOSX, etc.). Mailman is not supported on Windows, although web and mail clients on any platform should be able to interact with Mailman just fine.
Mailman requires at least Python 3.4, which may or may not be shipped by your operating system. If only earlier versions of Python are available, you must install Python 3.4 (or later) before following this tutorial. To do that, follow the procedure in the Python documentation.
You must also have Pip for Python 3.4 installed. If you’re using your
distribution’s package manager, it probably comes in a
python3.4-pip, or something similar). Otherwise you’ll have to
download it from PyPI.
Even if Mailman 3 runs on Python 3, the web interfaces and the commands in this procedure run on Python 2.7, so make sure your system Python version is 2.7.
To use Mailman, you must install and configure a Mail Transfer Agent (MTA) supported by Mailman. To this day, Postfix and Exim are supported. Installing and configuring an MTA is beyond the scope of this documentation; for assistance please refer to your specific operating system and preferred MTA. This package only provides Mailman configuration examples for Postfix.
If you haven’t already done so, download the sources of the Mailman bundler with the command:
bzr branch lp:mailman-bundler
Install Virtualenv (the Python 2.7 version), preferably using your distribution’s package manager. Now switch to a dedicated Mailman user. Setup a virtualenv for the Mailman suite and activate it with the following commands:
virtualenv venv source venv/bin/activate
In the bundler directory, open the
mailman_web/development.py file, look
SECRET_KEY parameter and set something random.
You will need to have GCC installed on your machine to install the dependencies.
If you have installed Python using your operating system’s packages, make sure
you have also installed the development headers. They are usually shipped in a
package with the
-dev suffix, for example
python3-devel. You need the headers for both Python 2 and Python 3.
mailman-bundler directory, install and run buildout:
pip install zc.buildout buildout
You will also need to install the LESS CSS compiler. It is usually packaged
by your distribution, on Fedora the package is named
nodejs-less, so you
can install it with:
sudo yum install nodejs-less
On Debian and Ubuntu, this is available in the
node-less package, which
you can install with:
sudo apt-get install node-less
Now initialize Django’s database:
Now create an initial superuser to login as:
This is the user you’ll use to login to Mailman’s web interface (Postorius).
Run the services¶
Run Django (the web interfaces server):
./bin/mailman-web-django-admin runserver &
By default, the web interface are available at:
deployment/postfix-main.cf will contain a few lines that you must add
to your main Postfix configuration file (usually
Add full qualified domain name of list(s) to
mydestination = lists.mydomain.com mydomain.com
Make sure postfix has read access to the
*.db files in
won’t have access by default). There are two ways to do that: you can change
the permissions of those files to world-readable or add postfix to your user’s
If you have SELinux enabled, make sure it is not blocking access to those
files. Their type should be
etc_aliases_t. You can set this type
permanently using the
semanage fcontext command.
Finally, restart postfix:
service postfix restart
Create a domain¶
- Open your browser and navigate to Postorius (http://127.0.0.1:8000/mailman3)
- Go to Settings -> “New domain”
- Enter a mail host:
- Enter a web host:
Create a mailing-list¶
- In Postorius, go to “Lists” and click “New list”
- Enter list name, e.g.
- Choose the mailhost
- Define the list owner (defaults to domain contact)
- Choose whether to advertise list
- Enter description
- Save list.
On the lists’ front page, add a moderator in the corresponding category.
Subscribe to your mailing-list¶
To subscribe, send an email to
email@example.com with subject
To unsubscribe, send an email to
Setting up for production¶
For a production setup, you first need to change the
deployment parameter to
buildout.cfg and run
buildout again. It will
regenerate the scripts in
bin and the contents of the
If you want to use a webserver module to serve Postorius and HyperKitty (like
Apache’s mod_wsgi), make sure your current directory is accessible by its user.
On some distributions, user directories in
/home are not accessible by the
It is also very strongly recommended to use an full-blown database server for Mailman, Postorius and HyperKitty. If you choose PostgreSQL, you’ll need the corresponding drivers, which can be installed with:
pip install psycopg2
This will require the PostgreSQL headers to compile, just install them from your distribution’s package manager. You also obviously have to start your database server, and create the databases and database users you are going to use.
The connection parameters to the database can be configured in
for Mailman, and
production.py for Postorius and HyperKitty. See the
DATABASES setting value.
Also note that HyperKitty uses a database and a full-text search index. The
backend used for this search engine is configured in the
HAYSTACK_CONNECTIONS variable of the settings file. Refer to the
Haystack documentation for the detailed settings available to configure the
full-text search engine.
If you want to make modifications to this
production.py file, it is
recommended to create a
settings_local.py file in the same directory and
put your variables there. This file will be sourced by the
file and variables will be overrrided. This way, you can easily merge changes
production.py file when you upgrade the package.
Only put in
settings_local.py the variable that you want to override.
production.py file also configures two variables pointing to
directories that must be created (probably as
root if you keep the default
values) and given the correct permissions.
STATIC_ROOTvariable, pointing to a directory where static files will be collected to be served directly by your frontend webserver, must be owned by your current user
HAYSTACK_CONNECTIONS.default.PATHvariable, pointing to a directory where the fulltext search engine files will be stored, must be readable and writable by your webserver user.
Finally, there are some other variables that need to be set in
production.py for production serving. You must set the hostname your
website will respond to in
out the links in the comments above those variables in
information on their expected value.
Also, if you’re using a proxy to serve your website, there may be additional
variables that you need to set in
production.py, such as
After settings those variables, re-run the
it will initialize the databases and collect the static files for direct
deployment directory, you will find configuration files that can be
useful for a production setup.
The Mailman service¶
mailman3.service file is an example Systemd service file to run Mailman
as a system daemon. You need to edit this file to set the
Group values to your current user (the one you ran buildout as), or you
will have to change the permissions on the var subdirectory.
If you run
buildout again, this file will be overwritten, and you will have
to set the
Group values again.
We currently have no SysVInit service file, but it should be easy to write if needed (then please send it to us for inclusion!).
postfix-main.cf file contains lines that must be added or adjusted in
main.cf configuration file. This bundle does not offer an example
Exim file, please send us your configuration if you use Exim.
You will also find a
mailman3.logrotate.conf file to place in your
/etc/logrotate.d directory to ensure rotation of the Mailman logs.
The web interface¶
The web interface can be made accessible in two ways:
- running as a WSGI application via a dedicated module in your webserver
- running standalone on a different port, and pointed at by a proxy or a proxy module in your webserver.
This bundle offers a few example configuration files, but it does not cover all cases. Please send us configuration files for the setups that are not covered yet.
In any case, the
production.py configuration file defines a directory where
Postorius and HyperKitty logs will be written to. By default, this directory is
/var/log/mailman-web. You will have to create this directory as
and then give ownership back to your webserver user.
deployment directory you will find
an example logrotate file to put in the
/etc/logrotate.d directory, to
ensure log rotation both for Postorius and HyperKitty.
Running on Apache HTTPd with
apache.conf file is an example configuration file for Apache HTTPd’s
mod_wsgi module that will run Postorius and HyperKitty in the same Django
instance. You will have to adjust the following permissions for your Apache
user on the
- write access to the SQLite database
- write access to the
- read access to the static files.
Running on Gunicorn¶
To add Gunicorn support, just run the following command:
buildout install gunicorn
(it is not enabled by default to minimize dependencies) You can then serve the Mailman web interfaces with Gunicorn by running the following command:
The webserver will listen on port
8000 by default, check out the
Gunicorn documentation to change that.
A service file and a socket activation file are provided in the
directory, their basename is
mailman-web-gunicorn. You can enable them the
usual Systemd way (with a symlink), but remember to change the
parameter to a specific user for security.
Please also read the Gunicorn deployment documentation.
Those are the only setups this bundle has example configuration for, but certainly not the only ones supported! We are looking for configuration examples for the following setups:
- running in uWSGI
- proxy configuration for Apache’s mod_proxy
- proxy configuration for Nginx
- anything else you may be using these days ;-)